Socket VMZV6 FLEX-ATX, User Manual

Page: 49 / 61

CMOS Setup Utility
3-23
PNP OS Installed
This item allows you to determine PnP OS is installed or not.
The optional: Yes,
No (Default)
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system cannot boot.
The optional are: Enabled,
Disabled(Default)
PnP / PCI Configurations PnP / PCI Configurations
PnP / PCI Configurations PnP / PCI Configurations
PnP / PCI Configurations
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
PnP / PCI Configuration
This section describes configuring the PCI bus system. PCI- Peripheral
Component Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of CPU itself using when communicates with its
own special components.This section covers some very technical items and
it is strongly recommended that only experienced users should make any
changes to the default settings.
PNP OS Installed
Reset Configuration Data
Recources Controlled By
* IRQ Recources
* DMA Recources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
No
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
Item Help
Menu Level
!
Select Yes if you are using a
Plug and Play capable
operating system. Select No
if you need the BIOS to
configure non-boot devices
Enter: Select F5 : Previous Values +/-/PU/PD: Value F10: Save
F6 : Fail-safe defaults Esc:Exit F1: General Help F7 : Optimized Defaults