CMOS Setup Utility
3-6
Processor Number Feature
This item allows you to enable / disable Processor Number.
The optional are:
Enabled (Default)
, Disabled
Quick Power On Self Test
This item speeds up Power On Self Test (POST) after you power up the computer.
If it is set to Enable, BIOS will shorten or skip some check items during POST.
The optional are: Enabled,
Disabled (Default)
First / Second / Third Boot Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The optional are:
Floppy (First Default), HDD-0(Second Default), LS /ZIP
(Third Default)
, HDD-1/2/3, ZIP 100, SCSI, CDROM, LAN, Disabled.
Boot Other Device
Select your Boot Device Priority.
The optional are:
Enabled (Default)
, Disabled
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical drive B to
logical drive A and vice-versa.
The optional are: Enabled,
Disabled (Default)
Boot Up Floppy Seek
Seeks disk drives during boot up.
The optional are:
Enabled (Default)
, Disabled
Boot Up NumLock Status
Selects power on state for NumLock.
The optional are: Off
,
On
(Default)
Summary of Contents for VMZV6 FLEX-ATX
Page 10: ...Overview Motherboard Layout 1 5...
Page 60: ...4 3 Software Utility...
Page 61: ...This Page Is Left For Note 4 3...