Socket VMZV6 FLEX-ATX, User Manual

Page: 41 / 61

CMOS Setup Utility
3-15
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
The optional are:
Auto (Default)
, Disabled, 3F8 / IRQ4, 2F8 / IRQ3, 3E8 / IRQ4,
2E8 / IRQ3
IR Function Duplex
This item allows you to select the IR half/full duplex function.
The optional are: Half
(Default)
, Full
TX, RX
inverting enable
This item allow you to enable the TX, RX inverting which depends on different
H/W requirement. This field is not recommended to change its default setting for
avoiding any error in your system
The optional are: No & No,
No & Yes(Default)
, Yes & No, Yes &Yes.
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
The optional are:
378/IRQ7(Default)
, 278/IRQ5, 3BC/IRQ7, Disabled
Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Select Normal,
Compatible, or SPP unless you are certain your hardware and software both support
one of the other available modes.
The optional are:
Normal (Default)
, EPP, ECP, ECP/EPP