Set Jumpers:
Set Jumpers:
Set Jumpers:
Set Jumpers:
Set Jumpers:
Jumpers are used to select the operation modes for your system. Each jumper on the
board has several metal pins with each pin representing a different function. A “1”
is written besides pin 1 on jumpers with several pins. To set a jumper, a plastic cap
containing metal contactor is placed over the jumper pins according to the required
configuration. A jumper is said to be shorted when the plastic cap has been placed
on two pins of it.The types of jumpers used in this manual are shown below:
Open set
Short set
Note:
Users are not encouraged to change the jumper settings not listed in this manual.
Changing the jumper settings improperly may adversely affect system performance.
Jumper Cap
3-pin Jumper
1
2
3
Hardware Installation
2-2
Summary of Contents for VMZV6 FLEX-ATX
Page 10: ...Overview Motherboard Layout 1 5...
Page 60: ...4 3 Software Utility...
Page 61: ...This Page Is Left For Note 4 3...