Hardware Installation
2-7
2
Removing a Memory Module
To remove memory modules, press the retaining clips outward simultaneously
until the DIMM disengages from the socket and then carefully remove the
DIMM from the socket.
1.
Install DIMM
1)
After remove the cover, install the DIMM in the sockets marked with
DIMM2, if the DIMM has been installed in the DIMM1 socket. Release the
plastic retaining clips at each end of the socket by pressing the clips outward
until they snap open.
2)
Orient a DIMM to the socket so the two notches in the DIMM connector are
aligned with the crossbars in the socket.
3)
Press the DIMM straight into the socket until the retaining clips snap into place
around the ends of the DIMM.
Summary of Contents for VMZV6 FLEX-ATX
Page 10: ...Overview Motherboard Layout 1 5...
Page 60: ...4 3 Software Utility...
Page 61: ...This Page Is Left For Note 4 3...