A
TTACHING THE
T
ETHER
1.
Use a coin or screwdriver to unlock and remove the battery cover. Turn
the lock underneath the scanner to a
horizontal
position to unlock.
2.
Remove the battery cover. Make sure you do NOT remove the battery.
The Bluetooth Device Address is printed on a label inside the battery
compartment. The address is used to identify the Bluetooth
CHS.
3.
Wrap the string loop of the tether around the inside part of the lock on
the battery cover.
4.
Replace the battery cover and turn the lock to a
vertical
position to
secure it.
5.
If desired, attach the tether to a lanyard or belt.
CHAPTER 2: HARDWARE PREPARATION
9
Summary of Contents for 7X
Page 50: ...6 2010 Printed in U S A...