S
CANNER
M
ODES
Scan the below command codes to change the scanner triggering mode or decode
parameter. Scanning the Standard Default mode command code will restore scanner
settings to factory default state.
Note:
Scanning multiple commands in a single instance will overwrite (not
append) the previous command.
Standard Default mode
Continuous scanning mode
Presentation mode
Aiming beam - activation - off (*)
Center decoding - active
Decode 1D codes only
Decode 1D and 2D codes
1D and 2D codes in bright environment
1D and 2D codes on reflective surface
Aiming beam - first pull aim/read
Center decoding - not active (*)
CHAPTER 6: COMMAND SHEET
33
Summary of Contents for 7X
Page 50: ...6 2010 Printed in U S A...
