R
EGULATORY
C
OMPLIANCE
The Socket
Bluetooth
Cordless Hand Scanner is designed to be compliant with the
rules and regulations in locations where they are sold and will be labeled as
required. This product is type approved — users are not required to obtain license or
authorization before using.
This product has been certified as conforming to technological standards. Therefore,
the following actions are punishable by law:
•
Disassembly or modification of this product
•
Removal of identification labels on the back of the product
The frequency used by this product is also used by industrial, scientific and medical
devices, such as microwave ovens, as well as wireless detectors for motion detectors,
such as those requiring licenses used on manufacturing lines or similar radio
transmitters (all of these wireless devices will be called “other wireless transmitters”
below). Most modern electronic equipment (e.g., in hospitals and cars), is shielded
from RF energy. However, certain electronic equipment is not.
1.
Please ensure that all medical devices used in proximity to this device meet
appropriate susceptibility specifications for this type of RF energy.
2.
In the unlikely event that there is electronic interference between this system and
other wireless transmitters, quickly change the location of operation or stop
operating the unit (cease signal transmission).
3.
If other electrical interference or related problems occur, contact Socket technical
support at
http://support.socketmobile.com/
Radio Frequency Interference Requirements
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Industry Canada: This device complies with part 15 of the Industry Canada rules.
Operation is subject to the following conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment is also ETS EN300 328-2, ETS EN301 489-1 and ETS EN301 489-17
compliant. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his or her own expense.
This equipment generates and radiates radio-frequency energy. To comply with FCC
RF exposure compliance requirements, the following antenna installation and device
operating configurations must be satisfied: (1) Users are not permitted to make
changes or modify the system in any way, and (2) connecting external antennas to
the
Bluetooth
Cordless Hand Scanner is prohibited. This device and its antenna must
not be co-located or operated with any other antenna or transmitter.
47
Summary of Contents for 7X
Page 50: ...6 2010 Printed in U S A...