6 • UK
●
»
… last lap time/ distance
●
»
VIEW/ DELETE/ DEL ALL sub-menus
●
»
Press S7 to exit.
How to use the VIEW/ DELETE/ DEL ALL sub-menus
VIEW
●
●
Press S5 while VIEW is highlighted to view the session data again.
●
●
Your SR200 will go back to the start/ end time/ distance screen.
●
●
Press S7 to exit.
DELETE
●
●
Press S1 to highlight DELETE, and press S5 to select.
●
●
After 2 seconds, the file will automatically be deleted, and your SR200 will go back to DATA mode.
●
●
Press S7 to exit.
DEL ALL
●
●
Use S1 to highlight DEL ALL, and press S5 to select. Your SR200 will display DATA ----
●
●
Press S7 to exit.
DATA numbering system of saved RUN data.
Sample data number:
D – 01
04 G
0924 – 2
D = Saved number of data file
04 = Total number of files saved that day*
G = Data recorded with GPS
09 = Month
24 = Day of the month
*Please note this total will include files saved and deleted.
Run Mode user settings and AUTO LAP setting
To enter and set your RUN mode user settings, press S7 to enter the RUN mode and then press and hold S11. Your SR200 will display
HOLD SET and then SET and AUTO LAP will flash. Press S1 to switch between the available settings and S5 to select a setting.
How to set AUTO LAP and use the manual lap time function
Your SR200 incorporates an AUTO LAP feature within RUN mode that enables you to analyse your training session data, split in to
‘virtual’ laps. The AUTO LAP feature can be switched on or off. When AUTO LAP is switched on, your SR200 will automatically alert you
with an audible alarm, each time you reach a pre-specified distance. You can set your SR200 to split your data over the following lap
distances:
●
●
0.4 miles or kilometres
●
●
1 mile or kilometre
●
●
2 miles or kilometres
●
●
3 miles or kilometres
●
●
4 miles or kilometres
●
●
5 miles or kilometres
You will also be able to analyse the data recorded for each lap, at the end of your session.