background image

2 • UK

Congratulations on purchasing your Snooper RUN SR200 

Your new Snooper RUN SR200 is packed with loads of great features. It uses the latest micro GPS technology and Snooper’s 
comprehensive RUN software to provide you with all the features and functions you would expect to find on one of the most 
advanced training watches on the market.

First, charge the battery

Before you use your SR200, you must charge the lithium battery for at least 4 hours, using the USB charging clip/cable. Ongoing 
charging times will depend on usage. Recharge whenever the display indicates a ‘low’ battery.  

Warning: You must recharge every 1-2 months, even if your SR200 is not being used.

While the battery is charging, your SR200 cannot be used and all buttons are disabled. 

When the battery is full, the display will read CHARGE 100%. The battery life is 8 hours when you are using a function that needs GPS, 
such as RUN. If GPS is off, say in TIME mode, the battery will last up to 12 months.

Charging your battery – step by step

1.  Plug your SR200 into your PC with the USB charging clip/cable provided.

2.  Align the charging clip with the contact pins on the back of your SR200.

3.  Connect the charging clip securely to your SR200. Your SR200 will display CHARGE and the percentage charge level of the 

battery.

User Tip: Thoroughly dry the charging contacts and surrounding area to ensure good electrical contact and prevent corrosion.

Battery low condition

You cannot turn on GPS when the battery is low. You will need to recharge the battery first, before your SR200 can connect to GPS.

When battery level becomes very low, your SR200 will automatically turn off, and the screen will go blank. 

In RUN mode, if your SR200 automatically turns off because there is not sufficient power in the battery, you will lose any information 
that was being collected during that session.

Previously stored and saved data will not be lost. You only lose data that was being collected, and that was not saved prior to the 
battery running out.  

User Tip: Always make sure the battery has enough power to complete training session before you start, as any data collected, 
but not saved, will be lost.

SR200

 GPS SPORTS WATCH

Summary of Contents for RUN SR200













Reviews: