5 • UK
Return to contents
AVN9010/20 V105.15
Notes on Installation
We recommend this unit should be installed by a qualified technician. If you intend to install this unit by yourself please refer to the
supplied Installation/connections manual .
Improper installation may cause battery drain or a short circuit. If the unit does not work refer to the Troubleshooting Guide on page
102 of this manual. Check the connections, referring to the supplied installation/connections manual.
Considerations:
●
●
Protect the unit screen from damage during the installation.
●
●
Do not expose the unit surface to chemicals, such as insecticide, insect repellent, etc.
●
●
When installing, be sure to fix securely. Snooper recommends the AVN S9010/20 Install kit (not supplied).
●
●
Switch the ignition Off durning the installation. Installing the unit with the ignition On may cause battery drain or a short circuit.
●
●
When installing, be sure not to damage or trap any car parts such as pipes, fuel tank or wiring by using a drill, as this may cause a
fire or damage to the vehicle.
●
●
Run all ground (earth) leads to a common ground (earth) point.
●
●
This unit is designed for negative ground (earth) 12 V DC operation only.
●
●
Do not disassemble or modify the unit.
●
●
Do not install in locations which interfere with airbag operation.
●
●
Do not trap the leads under screws, or catch in moving parts (e.g. seat railing).
●
●
Before making connections, turn the car ignition off to avoid short circuits.
●
●
Connect the power supply connection cables to the unit and speakers before connecting it to the auxiliary power connector.
●
●
Be sure to insulate any loose unconnected leads with electrical tape or heat shrink for safety.
●
●
Do not press on the LCD when installing the unit.
●
●
Install the unit with the monitor facing straight forward; do not install it at an angle.
●
●
If your car was parked in a cold or hot place, the picture may not be clear. However, the monitor is not damaged, and the picture
will become clear after the temperature in your vehicle becomes normal.
●
●
Some stationary blue, red or green dots may appear on the monitor. These are called “bright spots,” and can happen with any LCD.
The LCD panel is precision-manufactured with more than 99.99% of its segments functional. However, it is possible that a small
percentage (typically 0.01%) of the segments may not light up properly. This will not, however, interfere with your viewing.
Notes on the power supply lead (yellow)
When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the
sum of each component’s fuse.
When no car circuits are rated high enough, connect the unit directly to the battery.
Warning if your car’s ignition has no ACC position
After turning the ignition off, be sure to press and hold OFF on the unit until the display disappears. Otherwise, the display does not
turn off and this causes battery drain.
AVN S9010/20
AVN S9010/9020 V1 06/15 UK
