48 • UK
Return to contents
AVN9010/20 V105.15
3.16 Route Description
After a route has been calculated and the journey has commenced, you can access the summary display again by using this function.
To view the summary screen:
●
●
Press the centre of the screen to enter the ‘Navigate to’ menu.
●
●
Press the black arrow twice.
●
●
Press the ‘Route description’ icon.
In order to use this function on Snooper you will need to have entered and calculated a route.
If the ‘Route description’ icon is greyed out a route has NOT been entered.
From the summary display you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be taken,
‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey. The
‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
The summary screen is only displayed for approximately 10 seconds before the unit automatically returns to providing you
with turn-by-turn instructions.
3.17 TMC (Traffic Message Channel) - AVN S9020 ONLY
TMC Options
The type of alerts you receive whilst using TMC can be edited in the configuration menu of Snooper. To access the menu press the
centre of the display, then press
then twice and then
.
The following options are displayed:
The options can be deselected by pressing the
– the box will be displayed with the red tick removed
. To finalize your
selection press
TMC Icon
Once the unit starts to receive TMC alerts one of the two following icons will appear on the main screen:
This icon appears if Snooper has received TMC information but the delay or incident is not on your route.
This icon appears if the Snooper has received TMC information and the delay or incident affects your plotted route.
Using the ‘down
arrow’ will reveal
more options
AVN S9010/9020 V1 06/15 UK