15 • UK
Return to contents
AVN9010/20 V105.15
Installing the SD Card
To start navigation switch AVN S9010/20 on and press the NAV button Press the ‘Navi’
icon. When the ‘Navi’ icon is pressed the AVN S9010/20 will automatically synchronise
the AVN S9010/20 serial number with the SD Card. Once the synchronisation is
completed, the SD Card will not function with any other device. The AVN S9010/20 is
now ready to navigate and the camera database can be downloaded if necessary.
NOTE: Take care when inserting and removing the Micro SD card from the AVN S9010/20
System Requirements and Downloading
Before you can begin to download the database onto AVN S9010/20, you will need to install the AVN S9010/20 Updater software
provided on the software CD.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)
colours or greater, a CD ROM drive, 20MB of free disc space and a spare USB connection.
Software Requirements
The software will only operate on the following Windows based operating systems:
Windows Vista
Windows 7
Windows 8
NOTE: AVN S9010/20 Updater software does not support Windows 95, 98, Millennium, 2000 or Apple Macintosh operating
systems. Windows XP systems are also not supported.
Software Installation Instructions
Place the Software CD into a CD ROM or DVD drive. Your PC should automatically open a window displaying the instructions for
installing the software. Follow the instructions onscreen to install the speed camera updater software.
To launch the CD manually: Click on ‘Start’ and then ‘Run’. In the dialogue box that opens click on ‘Browse’ – another dialogue box
will open. Locate your CD ROM or DVD drive (drive letter is normally D) using the ‘Look in’ option and select ‘AVN S9010/20’ from the
lower portion of the dialogue box. Once you have selected ‘AVN S9010/20’ click on ‘Open’ on the explorer box and then ‘OK’ on the
Run dialogue box.
Please make sure that the operating system installs the new hardware first before installing the Camera Updater software. Once the
updater software has been installed click ‘Finish’ and then close the CD auto run window. After installing the software, click ‘Start’
then ‘All Programs’ and select the updater program to start it. Select your ‘Language’, ‘Vehicle Type’ and ‘Download Settings’ when
prompted.
Any updates to the speed camera updater software can be obtained from
www.snooperneo.co.uk/software.cfm.
If you have any
problems using this software please call 0333 240 1000 during office hours and select Option 3.
Once the software is installed, you are ready to download the speed camera database onto AVN S9010/20.
Lift the cover
to access the
SD card
AVN S9010/9020 V1 06/15 UK
