17 • UK
Return to contents
AVN9010/20 V105.15
Satellite Navigation
1. Starting Up
First make sure your vehicle is parked in as open a space as possible,
clear of tall trees and buildings so that the GPS antenna has a clear
view of the sky above. Switch the unit to navigation mode by pressing
the NAV button. If this is the first time the unit has been used the
screen calibration will be shown, follow the on screen instructions to
complete the screen calibration.
After the screen has been calibrated, a warning will be displayed (see
images on the right).
Please read the warning and select the relevant vehicle type (where applicable).
Press “I Agree” to continue.
Whilst AVN S9010/20 software is loading a start-up display will be shown for just a few seconds
and then the screen will show a section of a map. AVN S9010/20 needs to acquire a minimum of
four satellites in order to work. Once this has been achieved AVN S9010/20 will ascertain your position and this will be indicated by
a green arrow icon on the on-screen map and the GPS signal strength will be shown in the bottom right hand corner of the display.
AVN S9010/20 is now ready to navigate.
As the GPS engine and antenna have never been used before, the first ‘Cold’ start can take anywhere from 15 – 30 minutes to
establish a satellite connection. Once initialised, subsequent start ups will take less time and eventually should take only a matter
of minutes.
2. Easy Set Up
2.1 Screen settings
There are a number of map views or different types of information that can be displayed on the screen at any one time:-
3D
2D
North
1
2
3
4
5
6
7
8
9
10
Power button
NAV button
AVN S9010/9020 V1 06/15 UK
