![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqcspi-1/iqcspi-1_manual_1309058024.webp)
IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.24
The Tracks Tab
This contains the Track Actions and the Track
confirmations.
Note: To enable Tack Actions, Track_Failure or
Track_Success to be sent to other IQ modules it is
necessary to configure the IQ rack containing the
target module to allow incoming RollTracks. With
gateway software version 5.10 or later, the “Permit
Blind Control” command must be enabled.
The order in which the Track Actions appear
represent the order in which they will be executed.
To amend the order select a Track Action and then
click on either the Move Track Action Up button or
the Move Track Action Down button (these will
move the selected Track Action one position up or
down).
This view displays the Tracks Actions and
confirmation (Track_Failure, Track_Success). To
remove Track Actions, select one and press the
Delete key on the keyboard. To remove
Track_Failure or Track_Success go to the
respective text box and delete its contents. Clicking
on the Edit or Add button will generate a Track
Parameter window, where each track is
constructed.
For each command you can select when
RollTracks will be sent.