IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.8
OPERATION FROM AN ACTIVE CONTROL PANEL
The card may be operated with an active control panel via the RollCall™ network.
The menus available for this card are shown on the previous page and will appear in the Control display
window.
Operational details for the remote control panel will be found in SECTION 1 of the Modular System Operator's
Manual.
MENU DETAILS
(see IQCSPI Menu System on previous page)
MAIN MENU
The main, or top level menu allows various sub-
menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu, the text will become reversed (white-on-
black) indicating that the mode is active. If the
mode is not available for selection the text will
remain normal.
MAIN MENU
◀
Custom 1
to
Custom 4
▶
This function allows entry to any of four customized
settings to be enabled.
These functions reflect the four-customizable serial
ports. They are configured by downloading a
configuration file to the unit.
◀
Display
Basic information about the operational state of the
IQCSPI can be monitored and/or reset here.
The following functions may be selected:
◀
◀
◀
◀
Show_Stats
The information will be
displayed in the LCD
information window
◀
◀
◀
◀
Reset_Stats
Data will be reset