IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.25
Track Parameter window
Clicking the Browse for Unit button allows the
selection of a RollCall device on the network.
Once a device is selected, clicking on the Load
New Menu button will load the selected device’s
menu. Selecting a command from within the
treeview representation of the menu loads the
command’s parameters. Upon selecting OK a
RollTrack is created and placed in the respective
area on the Tracks Tab.
Upon clicking the Load New Menu button, there will
be a pause whilst the menu loads. If it is not
possible to load a menu then a message will
appear to this effect.
Note: RollCall only allows one connection at a time
to a device, so if for example something is
connected to a device it must be disconnected in
order to load its menu.
