![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqcspi-1/iqcspi-1_manual_1309058010.webp)
IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.10
IQCSPI Configuration File Editor User Guide
INTRODUCTION
The IQCSPI Configuration Editor is designed for use with a Serial Port Interface (SPI) card. The purpose of the
program is to provide easy creation and editing of an SPI card’s configuration file.
Functions within the IQCSPI Configuration Editor
Some of the functions of the IQCSPI Configuration File Editor are as follows:
•
Output File View – The complete file within a text editor.
•
Port View - A graphical (treeview) representation of how the menus will look if viewed on a IQ Modular
control panel.
•
Track Parameters – Constructs a RollTrack of a selected command from a device via RollCall.
•
Read/Write of SPI configuration file – Transfer of the configuration file between a drive and the SPI card.
Installation
The following pre-installation requirements exits:
•
Win95 (with Internet explorer version 4.0 or later), or later.
•
One of the suite of RollCall software version 3.3 or later
(Note: If RollCall software is not present then install the free copy of RollCall IQSPCE, which is included
with this package).
Once the above pre-installation requirements have been met the IQSPI Configuration Editor may be installed.