![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqcspi-1/iqcspi-1_manual_1309058013.webp)
IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.13
STARTING A NEW FILE
To start a new file from scratch select File, New (or
the respective toolbar icon). This will start a new
file with default contents as below:
Note this new file is held only within the IQCSPI
Configuration Editor application, so it will need to
be saved.
TRANSFERRING FILES BETWEEN DRIVE AND
SPI CARD
Note: RollCall only allows one connection at a time
to a device, so if for example a front panel is
connected to the SPI card it must be disconnected
in order to perform uploading or downloading.