IQCSPI
SECTION 33c
IQCSPOPS
100305
www.snellwilcox.com
Version 1 Issue 8
33c.27
Port Settings
The settings for each port may be edited by
clicking on the Port Settings button.
Swapping Ports
Clicking on the Swap Ports button allows two ports
to be swapped. This swaps both the commands
and the port settings of the two ports.
Cut, Copy & Paste
When using the tree structure representation of
each port cut, copy and paste work as follows:
•
Cut & Copy will place a copy of the selected
command (and its sub menu) in the clipboard.
Cut will also remove the selected command.
•
Paste will place a copy of the command (which
is held in the clipboard) underneath the
selected command.
Prompt to Save
If changes have occurred then the user will be
prompted to save when performing any of the
following: File New; File Open; Upload from SPI;
Download to SPI; Exit.
