BK-S216
User Manual
- 41 -
Appendix
Appendix 1 Self-test page
Print self-test page in the following steps:
Turn off printer power, then hold down the FEED button for
at least 1 second while turning on the printer. The printer will start to print a self-test page. (Take 200 dpi
and serial plus USB interface model as an example), the self test paper is shown as follows:
***BK-S2162 TEST FORM***
Boot Firmware
:FV1.010
Main Firmware
:FV1.000
H/W Parameters
H/W ID
:BK-S2162(U) 1
Flash Memory Size
:1M bytes
Flash Logos Size
:64k bytes
Resolution :300×300DPI
Print Width
（
Max
）
:216mm
Fixed Left Margin
:0mm
Fixed Right Margin
:0mm
Print Speed
（
MAX
）
:100mm/s
Dark Scale
:110
Cutter :Enabled
Bundler
:Enabled
Bundelr Mode
:Command Control
Communication Interface
Rx Buffer Size
:4096 bytes
Interface Type1
:RS232
Baud Rate
:38400bps
Data Bits
:8
Stop Bits
:1
Parity :NONE
Flow Control
:DTR/DSR
Command CR
:Ignored
Data Receive Error
:Print ‘?’
Interface Type2
:USB_BK-S216_1
Resident Fonts
Font0(12X24) :English
Font1(9X17) :English
Code Pages
:437,850,852
:858,860,863
:865,866,1252
:Katakana
International Character
:U.S.A
