BK-S216
User Manual
- 40 -
The printer stops printing and
warns errors during printing.
Paper is end.
Paper jams in cutter.
Paper jams in Bundler.
Install a new paper roll.
Check if there are sundries in cutter path.
Clean jammed paper in Bundler.
Table 7.1.3 Problem of paper out index
7.1.4 Other problems
Problem
Possible reasons
Solution
LED isn’t light
and printer
doesn’t work.
The printer is not
connected with the power
supply correctly.
The printer isn’t turned on.
Connect the printer with
the power supply
correctly.
Turn on the printer.
The printer
doesn’t work
after receiving
commands.
Printer is in error status.
The communication cable
is not connected well.
Interface setting is wrong.
Remove all errors (*).
Print a self-test page and
set the interface again
according to information
on it.
Make sure the
communication cable is
connected correctly.
Table 7.1.4 Other problems index
*Note
: Paper near end alarm acts only as a prompt for users, not error status. Therefore when this alarm
is given, printing task can still be sent.
