BK-S216
User Manual
- 25 -
¾
Ensure the paper holder intensity;
¾
Ensure paper shaft should be parallel with printer head, cutter etc.
¾
Paper width: If you use 210mm paper width, the paper holder should be from 212mm to 214mm.
As for 216mm paper width, ensure that paper holder width from 218mm to 220mm.
4.6.3 Caution for printer external outlet design
In your printer structure, an external paper outlet is needed to work with the printer. In order to ensure
smooth paper feed. We suggest that a design should be used at the joint of the external paper outlet and
the printer as shown in Fig.4.6.8.
Fig.4.6.8 External paper outlet
z
The upper plate A size of paper exit path should be controlled between 1 to 2mm and C size shall
be from 1 to 3mm in order to prevent paper jam in Bundler paper feed.
z
The lower plate B size of paper exit path should be controlled within 1mm and D size shall be from
1-2mm.
Caution:
¾
The external paper outlet should be smooth without burr, sharp corner or extrusion;
¾
Paper outlet design should not be against Bundler upper path turn up;
¾
Paper outlet cannot bend so that paper feed could be smooth;
¾
The bundler has the fixing holders for external paper outlet as shown in Fig. 4.6.9.
