BK-S216
User Manual
- 3 -
Safety Instructions
Before installing and using the printer, please read the following items carefully.
z
Install the printer at a flat and stable place.
z
Reserve adequate space around the printer so that the operation and maintenance can be performed
conveniently.
z
Keep the printer far away from water source.
z
Do not use or store the printer in a place exposed to heat of fire, moisture and serious pollution and
do not expose the printer to direct sunlight, strong light and heater.
z
Do not place the printer in a place exposed to vibration and impact.
z
No dew condensation is allowed to the printer. In case of such condensation, do not turn on the
power until it has completely gone away.
z
Connect the DC adapter to an appropriate grounding outlet. Avoid sharing one electrical outlet with
large power motors and other devices that may cause the fluctuation of voltage.
z
Disconnect the DC adapter when the printer is deemed to idle for a long time.
z
Don’t spill water or other electric materials into the printer. In case this happens, turn off the power
immediately.
z
Do not allow the printer to start printing when there is no paper installed, otherwise the print head and
platen roller will be damaged.
z
To ensure quality print and normal lifetime, use recommended paper or its equivalent.
z
Shut down the printer when connecting or disconnecting interfaces connectors to avoid damages to
control board.
z
Set the print darkness to a lower grade as long as the print quality is acceptable. This will help to
keep the print head durable.
z
Do not disassemble the printer without permission of a technician, even for repairing purpose.
z
Keep this manual carefully in hand for usage and reference.
