BK-S216
User Manual
- 20 -
2. Manual paper loading
1) Turn on the power and the buzzer will alarm paper end.
2) Press down the button on the print upper cover, and lift the print head.
3) Manually load paper as following figure, and make sure that the printing platen roller is fully covered
by paper.
4) Close the print head. The printer will automatically feed paper to right position.
Fig.4.5.2 Manual paper load
Caution
The paper head shall go through the horizontal positioning shaft (vertical structure doesn’t have this
shaft).
The paper shall go through between the up and down sliding plates of paper guide.
Fig.4.5.3 Paper load
1—positioning shaft (for horizontal structure only)
2—sliding plates
Before feeding the paper according to the instruction of Fig.4.5.4, cut the paper head trimly.
Fig.4.5.4 Paper head description
Adjust the paper guide according to paper roll width before feeding paper.
Put the side of paper guide on the digit in paper path that indicates the paper roll width.
