BK-S216
User Manual
- 31 -
¾
Click on "Finish" to complete the installation.
z
Windows Server 2003
¾
Connect USB interface printer to a PC and plug USB cable in an idle USB port. The operating
system will automatically recognize the USB device and pop-up "Add New Hardware Wizard". Click
on "Next" button. Select "Install from a list or specific location", click on "Next".
¾
Select "Search for the best driver in these locations", Click on "Include this location in the search",
then Click on "Browse", Search the USB device driver by browser. Default directory is
“Setup_BK-S216_EN V1.10\USBDriver2.20”. Click on "Next".
¾
The digital signature page will pop-up. Click “Continue Anyway” button.
¾
Click on "Finish" to complete the installation.
Under Windows XP and Windows Server 2003 operating system, when you connect the USB printer to
another USB port of PC for the first time, the system will again recognize the USB device and Pop-up
"Add New Hardware Wizard". If you already installed USB device driver under the operating system
according to above steps before, Select "Automatic installation" and click on "Next", the wizard will
search driver automatically, pop-up signature page after the wizard has searched the driver, click on
"Continue Anyway", and click "Finish" to end the installation.
Step 2: Install USB printer driver
Connect USB interface printer to PC, and then install the printer driver. Please refer to above “Typical
Installation” and “Advanced Installation”.
