manualshive.com logo in svg

Snap-On VERDICT D7, User Manual

Share
Download
Snap-On VERDICT D7 User Manual Download Page 59

50

Chapter 6

OBD Direct Operations

This Home screen option allows you to access Generic OBD-II/EOBD Scanner tests without 
completing a vehicle identification. This option presents a quick way to check for diagnostic 
trouble codes (DTCs), isolate the cause of an illuminated malfunction indicator lamp (MIL), check 
monitor status prior to emissions certification testing, verify repairs, and perform a number of other 
services that are emissions-related. OBD Direct is also used for testing OBD-II/EOBD compliant 
vehicles that are not included in the Scanner databases.

OBD Direct is a Scanner function, and the SCAN MODULE must be connected to the test vehicle 
and communicating with the display device. Keep in mind, this function only provides generic 
OBD-II/EOBD information. To access enhanced OBD-II/EOBD functions, select Scanner from the 
VERDICT Home screen.

Selecting OBD Direct on the VERDICT Home screen opens a menu with two options (

Figure 6-1

):

Figure 6-1 

Sample OBD Direct main menu

6.1   OBD Health Check

The OBD Health Check offers a way to quickly check for and clear generic diagnostic trouble 
codes (DTCs) and to check readiness monitors. Selecting OBD Health Check opens a submenu 
of options (

Figure 6-2

).

Summary of Contents for VERDICT D7


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands