Snap-On VERDICT D7, User Manual

Page: 102 / 153

93
Scope Multimeter Operations Getting Started
Common Lead
Figure 9-3 Red Channel 4 lead
The black lead ( Figure 9-3 ) with an integrated probe is used when a separate common, or ground,
connection is needed. The lead color matches the color of the COM socket on the Data
Acquisition Device.
Alligator Clips
Three insulated alligator clips that attach to the test leads are included. The insulator boots are
colored to match each test lead. Alligator clips attach to the probe end of the test lead.
z
To install an alligator clip:
1. Remove the collar from the probe by threading it counterclockwise off of the tip ( Figure 9-4 ).
Store the collar in a safe place while not in use.
Figure 9-4 Probe collar
2. Fit the tip of the probe into the alligator clip and thread the clip onto the probe.
Low Amp Current Probe (optional)
The optional Low Amp Current Probe ( Figure 9-5 ) provides accurate and reliable non-intrusive
testing of ignition coils, fuel injectors, fuel pumps, relays, electric motors, and parasitic draw. Use
to measure current from 10 mA to 40 Amps with a resolution of 1 mA.
Figure 9-5 Low Amp Current Probe