Snap-On Triton D8 User Manual Download | Manualshive

Page: 79 / 204

background image

69

Section 9

Quick Lookups

This section describes the basic operation, and navigation of the
following Quick Lookup functions:

•

Oil Specifications and Resets

•

Tire and Wheel Service

The

Quick Lookups

icon is located on the Home screen.

Main Topic Links

•

Oil Specs and Resets

•

Tire and Wheel Service

9.1 Oil Specs and Resets

Oil Specifications and Resets

is located in the Quick Lookups main menu

(Quick Lookups > Oil Specs and Resets).

Oil Specs and Resets is a integrated Information Service that provides up-to-date
OEM information on your diagnostic tool. Quick Lookups provides both OEM
information and Scanner functions in one place.

Typical OEM information provided:

•

Fluid capacity and specifications

•

Service reset procedures and information

•

Scanner Functional Resets

NOTES

— Oil Specs and Resets vehicle coverage is the same as the Scanner vehicle
coverage.

— Not all vehicles may have on-board diagnostic tool reset capabilities, or
have information available.

— To use the Oil Specs and Resets feature you must have authorized access,
contact your sales representative for details.

— The diagnostic tool is equipped with the ability to connect to a Wi-Fi
network, however the connection is solely dedicated to our Snap-on Web
Services Network. Before you begin using an integrated Information Service
you must connect to a wireless network. See

Configure Wi-Fi

on page 145 for

instructions.

— If you experience a wireless network connection loss, Oil Specs and
Resets information will not refresh and/or may cause the function to stop. To
continue use, you must re-establish your Internet connection.

— Performance may vary depending on your wireless network equipment and
ISP.

«
...
77
78
79
80
81
...
»

Summary of Contents for Triton D8













































































































































































































Reviews:

No comments

Related manuals for Triton D8

Brand: ADVANCED HOME CARE Pages: 16

Brand: TC Electronic Pages: 2

Brand: Bahco Pages: 131

Brand: Bahco Pages: 126

Brand: ParaBody Pages: 5

Brand: Baileigh Industrial Pages: 28

Brand: Baileigh Industrial Pages: 56

Brand: dbx Pages: 2

Aspect Q-CARD 100-4T

Brand: idi Pages: 38

Brand: Octane Fitness Pages: 20

Brand: Oceaneering Pages: 27

Brand: M-Audio Pages: 3

Brand: Xtralis Pages: 26

Brand: York International Pages: 16

Brand: X-10 Pages: 12

Brand: Equinox Systems Pages: 8

Brand: Qtx Pages: 6

Scanmate-B DGH 8000

Brand: DGH TECHNOLOGY Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands