manualshive.com logo in svg

Snap-On Triton D8, User Manual

Share
Download
Snap-On Triton D8 User Manual Download Page 112

Scope Multimeter

Test Leads and Accessories

102

12.4.3 Alligator Clips and Probes

Insulated alligator clips and probes (pointed type) can be attached to the end of the 
test leads. Each alligator clip is color matched with a test lead, and the probes are 
available in red and black.

Figure 12-4 

Alligator clips

12.4.4 Secondary Ignition Coil Adapter Lead and 
Clip-on Adapter (optional)

The secondary ignition adapter lead can be used with the secondary ignition clip-on 
wire adapter, coil-in-cap (CIC), or coil-on-plug (COP) secondary ignition adapters to 
display secondary ignition signals. The clip-on adapter clips over a secondary 
ignition wire to pickup a signal, and the CIC and COP adapters attach to the ignition 
coil. The coil adapter lead includes a black, right-angle stackable ground plug, and 
a RCA type connector that is used to connect the lead to a secondary ignition 
adapter. The spring clamp is used to connect to a ground. 

Figure 12-5 

Secondary Ignition Coil Adapter Lead and Clip-on Wire Adapter

NOTE

Contact your sales representative for additional information on OEM specific 
CIC and COP secondary ignition adapters.

12.4.5 Low Amp Current Probe (optional)

The Low Amp Current Probe is used measure AC or DC current up to 60A. This 
probe includes two scales (0 to 20A) and (0 to 60A) that can be used to provide 
accurate and reliable non-intrusive current measurement for components such as, 
ignition coils, fuel injectors, fuel pumps, relays, and electric motors. 

Figure 12-6 

Low Amp Current Probe

12.4.6 Temperature Probe Adapter (optional)

The temperature probe adapter can be used to measure temperatures ranging from 
–50° F to 1,800° F. Different probes are available for surface, fluid and air 
temperature measurements.

Figure 12-7 

12.4.7 Pressure Transducers and Adapters (optional)

Different pressure transducers and adapters are available for measuring positive 
and negative gas and liquid pressures. Depending on the adapter, measurement 
capabilities range from 1 to 5000 psi and up to 29 inHg. Measurement and 
application capabilities vary per device. 

Figure 12-8 

Summary of Contents for Triton D8













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands