180º
270º
360º
Operation
Left Rear Runout
A. Turn the wheel forward (top of the clamp
toward the front of the vehicle) 9 o’clock
position or until the runout display on the
monitor indicates a “Stop Sign”. The runout
LED indicator stops flashing and glows
continuously when the correct position is
attained.
B. Rotate the wheel in the same direction to
the 6 o’clock position. The top of the clamp
will be down as indicated in the illustration
to the left.
C. Rotate the wheel in the same direction
to the 3 o’clock position. The top of the
clamp will be to the right as indicated in
the illustration to the left.
B. Rotate the wheel in the same direction
to the 12 o’clock position. The top of
the clamp will be up as indicated in the
illustration to the left.
Repeat the above steps for the Right Rear
wheel.
NOTE
, the top of the clamp will first
be rotated toward the front of the vehicle. The
first position will be 3 o’clock, then 6, 9, 12.
LED will flash
during Runout
90º Forward
34
Summary of Contents for EEWA717A
Page 1: ...Form ZEEWA717A Operators Manual EEWA717A and EEWA719A Aligner Systems ...
Page 2: ...Blank page ...
Page 6: ......
Page 65: ...Notes ...