Snap-on Equipment EEWA717A, Operator'S Manual

Page: 55 / 66

EZ Toe
This software routine is an improved method
of setting front toe, making it easier to obtain
straight steering wheels. It also makes it
possible to adjust toe with the wheels turned
at any angle left or right, an aide when setting
toe on cars with firewall-mounted rack and
pinion units.
Use the following procedures:
1. Perform all alignment steps normally used to obtain
alignment readings. Correct any misalignment in
the rear as well as front caster and/or camber.
2. Select the EZ Toe icon from the Adjust screen.
3. Level the vehicle steering wheel, Select OK.
4. Steer the right wheel to the adjust position. Select
OK.
5. The next screen shows a meter indicating the
amount of toe change needed for the right
wheel.
6. Adjust the right tie rod until the meter needle is in
the green. Select OK after completion.
7. Follow the same procedures for the left wheel.
8. Select OK once the left toe adjustment is made.
9. Return to the Front Readings screen and recheck
toe and steering wheel position.
NOTE: If using EZ Toe at a large turn angle, it
will be necessary to use the Steering Wheel
Clamp to hold the linkage steady at that
position.
“OK”.
53