Introduction
Wheel Clamps
Wheel clamps are adjustable to different wheel sizes
and types.
Two types of rim claws are supplied, one standard set
and a set used for those vehicles with lug mounted
wheel covers.
Measuring Pods
Each Measuring Pod is mounted to a wheel clamp. To
attach, make sure the pivot shaft key way is facing up,
then insert the shaft into the hole in the clamp center
slide. Tighten the Hex Head Cap Screw, then tighten
the jam nut to prevent loosening. There are 2 Pods,
a right rear and a left rear.
Some functions of the aligner can be controlled from
the measuring Pods. Study the keypad to become
familiar with the layout of the Pod controls which
are:
1 Battery condition/Front Runout indicator LEDs
2 On/Off
3. Runout
4. Diagnostics LEDs
5. Master reset - not shown
Aligner Software
Operation from the console is accomplished primarily
by a single mouse click to initiate each function. The
right mouse button is not utilized within the alignment
software.
A standard keyboard is included for data entry. All
aligner functions can also be controlled from the
keyboard similar to the remote and the measuring
Pods. The function keys (F1 - F12) located on the
top row of the keyboard have decals that are the
equivalent screen icons.
In addition, the keyboard has a “Print Screen” key.
When this key is pressed the currently displayed
screen will be captured and printed.
10
3
1
2
5
4
Summary of Contents for EEWA717A
Page 1: ...Form ZEEWA717A Operators Manual EEWA717A and EEWA719A Aligner Systems ...
Page 2: ...Blank page ...
Page 6: ......
Page 65: ...Notes ...
