Snap-on Equipment EEWA717A Operator'S Manual Download | Manualshive

Page: 30 / 66

background image

Operation

View Specifications

This screen displays Year, Manufacturer, and
Model of the selected vehicle with Minimum,

Preferred and Maximum specifications for

the front and rear wheels. Dashes in any
position indicate there are no manufacturer

specifications for that wheel or angle. For

angles not displayed on this screen, refer to

the specification book included in the literature

package. A “wrench” icon to the right of

the specifications field indicates the Aligner

has  assistance  available  for  adjusting  that
angle.  Clicking on the wrench launches the
adjustment  help  features  described  on  the
next page.  The Edit Specs toolbar button (F8)

allows editing of the displayed specifications

prior to beginning the measurements. This is
useful if a Technical Bulletin has been issued
that alters manufacturer’s specifications.
Pressing

“Ctrl-Alt-F8”

simultaneously allows

specs to be viewed at any time from within
the alignment process.

Editing Specifications

To edit the displayed specifications, click on

toolbar button F11, Edit Specifications. The

toolbar configuration will change, with a plus

and minus sign displayed (F6 and F7). Use

the pointer to click on the specification to be

edited (i.e. left camber).  Once it is highlighted,
use  the  plus  and  minus  buttons  to  change
the  specification  as  needed.    Notice  that
when the left value is changed the right value
changes at the same time.  Use the pointer to
move to any other values to be changed.  If
any mistakes are made, or the user wants to

return to manufacturer’s specifications, click

on Restore (F11).

When all editing is complete, click on OK.
Since these edited specs are now custom,
a prompt appears to enter in a description of

the new custom specification.

28

«
...
28
29
30
31
32
...
»

Summary of Contents for EEWA717A



































































Reviews:

No comments

Related manuals for EEWA717A

ACS880-01 Series

Brand: ABB Pages: 238

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: Raven Pages: 27

Brand: Raven Pages: 79

Brand: Raven Pages: 88

Ettan IPGphor 3

Brand: GE Pages: 64

Brand: GE Pages: 56

Brand: GE Pages: 132

Brand: GE Pages: 16

Brand: GE Pages: 474

Brand: Zetec Pages: 23

Brand: NEILPRYDE Pages: 53

Brand: 3Disc Pages: 12

FreeStyle Comfort

Brand: CAIRE Pages: 33

BODY ARMOR PRO TERM

Brand: Darco Pages: 6

Brand: IBEX Pages: 4

Brand: Jaga Pages: 32

Brand: Ultraflex Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands