Assembly
Note:
Carefully cut the straps holding the carton together. Cut the carton sleeve so that it can
lay flat on the ground to provide a clean surface for assembling your Grill. Remove the packing
materials and all the parts from inside the Cabinet. After unpacking all the parts, check to make
sure you HAVE all the parts. If anything is damaged or missing, contact our toll free number:
866-475-5180. Discard all packing material in a safe and recyclable manner. Save this Assem-
bly Manual for future reference.
Note: “ Do not tighten any bolts until instructed to do so at a later date”
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
8
Step 1: Assemble four Legs to Cart Bot-
tom Panel
Locate
: (4) Legs, Bottom Panel and (10) M6x8
bolts. Note- each leg will have an identification
label on it.
Procedure
:
Refer to Fig. 1, attach (4) Legs to Cart Bottom
Panel using (10) M6x8 bolts.
Leg #2
Leg #1
Leg #3
Leg #4
Leg #3
Leg #4
Step 2
:
Assemble LP Gas Cylinder Bot-
tom Support Brace
Locate
: LP Gas Cylinder Bottom Support
Brace and (2) M6x15 bolts
Procedure:
Refer to Fig. 2, attach the LP Gas Cylinder
Bottom Support Brace to the Left Rear Leg #3
and Left Front Leg #4 using (2) M6x15 bolts.
Grill Assembly
Step 1:
Refer to Fig. 1, attach (4) Legs to Cart Bottom
Panel using (10) M6x8 bolts.
Note: Carefully cut the straps holding the carton together. Cut the carton sleeve so that it can lay flat on the ground
to provide a clean surface for assembling your Grill. Remove the packing materials and all the parts from inside the
Cabinet. After unpacking all the parts, check to make sure you HAVE all the parts. If anything is damaged or missing,
contact our toll free number: 866-475-5180. Discard all packing material in a safe and recyclable manner. Save this
Assembly Manual for future reference.
Note: “ Do not tighten any bolts until instructed to do so at a later date”
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
Step 2:
Refer to Fig. 2, attach the LP Gas Cylinder
Bottom Support Brace to the Left Rear Leg #3
and Left Front Leg #4 using (2) M6x15 bolts.
Assembly
Note:
Carefully cut the straps holding the carton together. Cut the carton sleeve so that it can
lay flat on the ground to provide a clean surface for assembling your Grill. Remove the packing
materials and all the parts from inside the Cabinet. After unpacking all the parts, check to make
sure you HAVE all the parts. If anything is damaged or missing, contact our toll free number:
866-475-5180. Discard all packing material in a safe and recyclable manner. Save this Assem-
bly Manual for future reference.
Note: “ Do not tighten any bolts until instructed to do so at a later date”
Tools Required: Phillips Head Screwdriver, Adjustable Wrench or Pliers
8
Step 1: Assemble four Legs to Cart Bot-
tom Panel
Locate
: (4) Legs, Bottom Panel and (10) M6x8
bolts. Note- each leg will have an identification
label on it.
Procedure
:
Refer to Fig. 1, attach (4) Legs to Cart Bottom
Panel using (10) M6x8 bolts.
Leg #2
Leg #1
Leg #3
Leg #4
Leg #3
Leg #4
Step 2
:
Assemble LP Gas Cylinder Bot-
tom Support Brace
Locate
: LP Gas Cylinder Bottom Support
Brace and (2) M6x15 bolts
Procedure:
Refer to Fig. 2, attach the LP Gas Cylinder
Bottom Support Brace to the Left Rear Leg #3
and Left Front Leg #4 using (2) M6x15 bolts.
Cart Bottom
Panel
Support
Brace
Fig. 1
Fig. 2
7
