Grill Assembly
Step 18:
Procedure: Refer to Fig. 18 and Align the
Firebox Assembly with the rectangular
opening in the right side of the Grill Cabinet,
so that it is resting on the ledge of the Firebox
Support Bracket. Insert (3) M6x15 bolts
through the Firebox and the Cabinet Wall.
Attach (3) M6 KEPS nuts to each of the bolts.
Insert (3) M6 x15 bolts through the Firebox
and the Firebox Support Bracket and attach
(3) M6 KEPS nuts to the bolts. Make certain
that all bolts are securely tightened.
Step 19:
Procedure: Refer to Fig. 19 and place the
Firebox Door Handle on the outside of the
Firebox Door and insert an M6x15 bolt
through the Door Handle and the Door as
shown. Attach an M6 metal lock nut.
Tighten with wrench or pliers until the
Handle can still move freely.
Step 20:
Procedure: Refer to Fig. 20A – Insert the (4)
bolts and leave them about ¼” out. Now
“hang” the Sear Burner Housing onto these
(4) bolts and push down to seat it, then tighten
the bolts securely. Note: (2) bolts need to be
tightened from the underside of the Housing.
Assembly
Step 18: Assemble Firebox
Locate
: Firebox and Lid Assembly, (6) M6x15
bolts, and (6) M6 KEPS nuts
Procedure:
Refer to Fig. 18 and Align the Fire-
box Assembly with the rectangular opening in
the right side of the Grill Cabinet, so that it is
resting on the ledge of the Firebox Support
Bracket. Insert (3) M6x15 bolts through the
Firebox and the Cabinet Wall. Attach (3) M6
KEPS nuts to each of the bolts. Insert (3) M6
x15 bolts through the Firebox and the Firebox
Support Bracket and attach (3) M6 KEPS nuts
to the bolts. Make certain that all bolts are se-
curely tightened.
Step 19: Assemble Firebox Door Han-
dle
Locate
: Firebox Door Handle, (1) M6x15 bolt
and (1) M6 metal lock nut
Procedure
: Refer to Fig. 19 and place the
Firebox Door Handle on the outside of the
Firebox Door and insert an M6x15 bolt
through the Door Handle and the Door as
shown. Attach an M6 metal lock nut. Tighten
with wrench or pliers until the Handle can still
move freely.
17
Step 20: Sear Burner Housing Assem-
bly
Locate:
Sear Burner Housing and Lid, Sear
Burner, Sear Burner Control Knob, (6) M6x15
bolts and (2) ST4.0x10 screws,
Procedure
: Refer to Fig. 20A – Insert the (4)
bolts and leave them about ¼” out. Now
“hang” the Sear Burner Housing onto these
(4) bolts and push down to seat it, then tighten
the bolts securely. Note: (2) bolts need to be
tightened from the underside of the Housing.
Assembly
Step 18: Assemble Firebox
Locate
: Firebox and Lid Assembly, (6) M6x15
bolts, and (6) M6 KEPS nuts
Procedure:
Refer to Fig. 18 and Align the Fire-
box Assembly with the rectangular opening in
the right side of the Grill Cabinet, so that it is
resting on the ledge of the Firebox Support
Bracket. Insert (3) M6x15 bolts through the
Firebox and the Cabinet Wall. Attach (3) M6
KEPS nuts to each of the bolts. Insert (3) M6
x15 bolts through the Firebox and the Firebox
Support Bracket and attach (3) M6 KEPS nuts
to the bolts. Make certain that all bolts are se-
curely tightened.
Step 19: Assemble Firebox Door Han-
dle
Locate
: Firebox Door Handle, (1) M6x15 bolt
and (1) M6 metal lock nut
Procedure
: Refer to Fig. 19 and place the
Firebox Door Handle on the outside of the
Firebox Door and insert an M6x15 bolt
through the Door Handle and the Door as
shown. Attach an M6 metal lock nut. Tighten
with wrench or pliers until the Handle can still
move freely.
17
Step 20: Sear Burner Housing Assem-
bly
Locate:
Sear Burner Housing and Lid, Sear
Burner, Sear Burner Control Knob, (6) M6x15
bolts and (2) ST4.0x10 screws,
Procedure
: Refer to Fig. 20A – Insert the (4)
bolts and leave them about ¼” out. Now
“hang” the Sear Burner Housing onto these
(4) bolts and push down to seat it, then tighten
the bolts securely. Note: (2) bolts need to be
tightened from the underside of the Housing.
Assembly
Step 18: Assemble Firebox
Locate
: Firebox and Lid Assembly, (6) M6x15
bolts, and (6) M6 KEPS nuts
Procedure:
Refer to Fig. 18 and Align the Fire-
box Assembly with the rectangular opening in
the right side of the Grill Cabinet, so that it is
resting on the ledge of the Firebox Support
Bracket. Insert (3) M6x15 bolts through the
Firebox and the Cabinet Wall. Attach (3) M6
KEPS nuts to each of the bolts. Insert (3) M6
x15 bolts through the Firebox and the Firebox
Support Bracket and attach (3) M6 KEPS nuts
to the bolts. Make certain that all bolts are se-
curely tightened.
Step 19: Assemble Firebox Door Han-
dle
Locate
: Firebox Door Handle, (1) M6x15 bolt
and (1) M6 metal lock nut
Procedure
: Refer to Fig. 19 and place the
Firebox Door Handle on the outside of the
Firebox Door and insert an M6x15 bolt
through the Door Handle and the Door as
shown. Attach an M6 metal lock nut. Tighten
with wrench or pliers until the Handle can still
move freely.
17
Step 20: Sear Burner Housing Assem-
bly
Locate:
Sear Burner Housing and Lid, Sear
Burner, Sear Burner Control Knob, (6) M6x15
bolts and (2) ST4.0x10 screws,
Procedure
: Refer to Fig. 20A – Insert the (4)
bolts and leave them about ¼” out. Now
“hang” the Sear Burner Housing onto these
(4) bolts and push down to seat it, then tighten
the bolts securely. Note: (2) bolts need to be
tightened from the underside of the Housing.
Fig. 18
Fig. 19
Fig. 20A
15
