4 | SmithsEP.co.uk | Issue 001 - November 2018
6. Electrical connection
IMPORTANT: Connection to the power supply must be effected by means of a fixed
power cable which is fitted with a plug-type connection or a two pole isolating switch
with a minimum contact opening of 3 mm.
Electrical connection must be carried out by a qualified electrician and in
accordance with local regulations and both data on the name-plate and the
appropriate diagram inside the terminal box cover.
Follow all safety standards.
7. Connect the appliance only to a mains supply protected by a Residual Current Device
(RCD or Ground-Fault Circuit-Interrupter) with a rated residual operating current not
exceeding 30mA.
8. Prior to any modification being made to the equipment, it must be agreed with and
authorised by the manufacturer. Original spare parts and accessories authorised by the
manufacturer are integral part contributing to the safety of the equipment and of the
machines. The use of non original components or accessories may endanger the safety
and causes the termination of the warranty. Safe operation is only assured for the
applications and conditions described in Application of this manual.
Non-observance of the safety instructions results in the loss of any claims to damages.
The indicated limit values are binding and cannot be exceeded for any reason whatsoever.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Important safety and installation instructions
Prior to installation, read these installation and operating instructions. The installation and operation should
also be in accordance with national regulations and accepted codes of good practice.
Application
Space Saver is primarily intended for installation in the space beneath kitchen cupboards behind the plinth.
However, it can be also installed in similar applications such as stair cases and other built-in furniture.
This Space Saver model must NOT be installed in a bathroom or other areas of high humidity. Please contact
us on +44 (0) 1245 324560 for details of products suitable for these applications.
In compliance with LOT20 European legislation, this product is supplied with a wireless battery powered
wall-mounted time and temperature controller. This heater will NOT function without the wall-mounted
controller. The controller can control an unlimited number of heaters.
Space Saver is fitted with an overheat protection. The heater will automatically stop in the event of the
heating elements reaching the cut-out temperature.
SS5D dual models are designed for use on standard two -pipe pumped central heating systems. Pipes are
15mm and either may be used as flow or return. The product is not suitable for one-pipe systems.
Please note the guarantee may be invalidated if this product is not installed and used in accordance with
this guide.
