Smiths SS2E Installation, Commissioning And User Instructions Download Page 18 | Manualshive

Page: 18 / 28

background image

18 | SmithsEP.co.uk | Issue 001 - November 2018

Basic setting enabled

1.  Ensure your fused spur is switched ON
2.  Ensure the wireless controller is switched ON
3.  Switch the upper fan switch to ON
4.  Ensure the wireless controller is paired (page 9)

with the heater

5.  Set the thermostat to the desired temperature
6.  Set the middle 1kW switch to ON
7.  If you require a faster warm up, also set the

lower 2kW switch to ON

Please note all switches must be in the ON
position to achieve 2kW output
8. To turn the heater OFF, set the controller

switch to off (heating symbol not shown

on display)

For your safety this Kitchen Heater is fitted with
an automatic overheat protection. If the heater
stops, turn off the power at the fused spur, wait 5
minutes and switch the power back on.

Air Circulation (Summer use)

Set the thermostat to maximum set the fan switch
to ON ensure the 1kW and 2kW switches are set
to OFF. Kitchen Heater will provide a cooling flow
of air.

Temperature control for Comfort
(COMF) enabled

1.  Ensure your fused spur is switched ON
2.  Ensure the wireless controller is switched ON
3.  Switch the upper fan switch to ON
4.  Ensure the wireless controller is paired (page 9)

with the heater

5. Set the thermostat to the desired temperature

up to the maximum set during the

installation process

6. Set the middle 1kW switch to ON
7. If you require a faster warm up, also set the

lower 2kW switch to ON

Please note all switches must be in the ON
position to achieve 2kW output
8. To turn the heater OFF, set the controller

switch to off (heating symbol not shown

on display)

For your safety this Kitchen Heater is fitted with
an automatic overheat protection. If the heater
stops, turn off the power at the fused spur, wait 5
minutes and switch the power back on.

Air Circulation (Summer use)

Set the thermostat to maximum set the fan switch
to ON ensure the 1kW and 2kW switches are set
to OFF. Kitchen Heater will provide a cooling flow
of air.

SS2E

How to operate

Fan on

1Kw on
2Kw on

Off
Off
Off

OFF

OFF

OFF

FAN ON

1KW ON

2KW ON

Fan on

1Kw on
2Kw on

Off
Off
Off

OFF

OFF

OFF

FAN ON

1KW ON

2KW ON

«
...
16
17
18
19
20
...
»

Summary of Contents for SS2E





























Reviews:

No comments

Related manuals for SS2E

Brand: JAMA Pages: 55

Brand: S&P Pages: 36

Brand: S&P Pages: 16

Optyma Blue OP-LGHE068NTA07D

Brand: Danfoss Pages: 8

Brand: Alfa Laval Pages: 16

ecoTOUGH NRC111-DV-LP

Brand: Noritz Pages: 32

Brand: NEO TOOLS Pages: 161

Brand: S+H Nolting Pages: 35

Brand: Reality Leuchten Pages: 86

Brand: UNITED Pages: 8

Brand: RBI Pages: 44

Brand: Enviro Pages: 112

Brand: Versonel Pages: 12

Brand: Gasmate Pages: 8

Brand: Zephir Pages: 15

Brand: Comet Pages: 9

DYNAMIC-SS/X8/C

Brand: HydroTherm Pages: 4

Brand: Aquacal Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands