manualshive.com logo in svg

Smiths Medical CDS 9000, Operation Manual

Share
Download
Smiths Medical CDS 9000 Operation Manual Download Page 28

Chapter 4:  Routine Maintenance

4-4 

 

 

 

 

          Surgivet

®

 Universal CDS 9000 Operation Manual

Pop-off Valve Removal and Cleaning

Figure 4-1: Pop-Off Valve Removal (Supplies needed)

NOTE!  Pop-Off Valve shown disassembled from the machine for clarity. It is not necessary to disassemble 

the Pop-Off Valve from the machine to perform this operation.

Supplies Needed:

5/64 Allen Wrench

• 

70% Isopropyl Alcohol - not shown

• 

Soft Cloth

• 

Krytox® Lubricant

• 

Needle-Nosed Pliers - not shown

• 

Loosen the small set screw located on the chrome body of the Pop-off Valve.  (See Figure 4-2)

1. 

Open the Pop-Off Valve to the fully open position (counterclockwise) and then turn 1/4 turn back 

2. 

(clockwise). Unscrew the top black portion of the Pop-off Valve and then unscrew the assembly from the 

body. (See Figure 4-3)

Figure 4-2: Loosen Set Screw on Pop-Off Valve

Figure 4-3: Unscrew Assembly from Body

Summary of Contents for CDS 9000













































Reviews:

No comments

Brands by name

Popular brands

Load more brands