33
Stopping the Pump During an Infusion
Stopping the pump
between doses
does not affect the start time of
later doses. Stopping the pump
while a dose is in progress
shifts all
subsequent doses by the amount of time the pump is stopped (see
the image below).
If you want to make up for the time lost in the cycle because the
pump was stopped during a dose,
wait until the current dose is
complete,
then stop the pump in between doses and set a Next Dose
Start Time.
To stop the pump:
1. Press the stop/start
9
key on the pump.
2. When
“Stop Pump?”
appears,
select
Yes
.
3. The pump stops. The green
“Running”
message in the status bar changes to a
red
“Stopped”
message, and
“Pump is
stopping…”
appears briefly.
4. If a dose is stopped in progress,
“Interrupted” appears on the screen.
To resume the dose, start the pump.
If you want to cancel the current dose
and set the cycle to restart at a time
you select, set the Next Dose Start
Time (see page 34).
Time
Deliv
er
y R
at
e
KVO
KVO
Dose
Dose
Pump
stopped
for 10 min
Subsequent
doses shift
by 10 min
Summary of Contents for cadd-solis VIP 2120
Page 43: ...43 ...
