20
8.3
First use each day (tank and boiler empty)
Indicator lights showing: off; green; orange;
flashing.
Display shows
Actions and what happens
With the door closed:
Press
and hold it down, with word FILL appears.
the glasswasher fills the tank after the water in the boiler
has heated up; light
L2
shows orange and the boiler
heating element symbol appears on the display.
Wait for
P1
to appear and LED
L1
to change from red to
green; the tank heating element light comes on until the
set temperature is reached. The duration of this stage may
vary depending on the mains water temperature and on
the single-phase connection.
Press the
button quickly to display the tank (left) and
boiler (right) temperatures for a short time.
Load the dishes
Select the program required by pressing
.
Confirm the program start by pressing
and holding it
down for 1 second (light
L2
changes from green to
orange).
Cycle in progress, the progress of the cycle is displayed by
vertical bars which illuminate in sequence. If the door is
opened “CLOSE” flashes and the program stops. Close the
door again and confirm the program start by pressing
and holding it down for 1 second (light
L2
changes from
green to orange).
Summary of Contents for PROFESSIONAL GLASSWASHER
Page 1: ...PROFESSIONAL GLASSWASHER ...
