22
9 CHOOSING THE PROGRAM
PROGRAM
TYPE OF DIRT
DURATION (*)
P1
Glasses and cups
Short, about 1’ 30”;
1’ with
glassware
function active.
P2
Glasses, cups with light dirt
Average, about 2’ 30”;
2’ with
glassware
function active.
P3
Very dirty glasses and cutlery
Long, about 4’;
5’30” with
sani
function active.
P4
Depending on the duration set.
As required from 3 to 10'.
(*)
The cycle duration stated above refers to three-phase appliances supplied with hot water at
50°C. If the appliance is supplied with cold water, the cycle duration might increase depending
on the intake water temperature, since the glasswasher is fitted with the HTR system, which
requires set temperature and pressure for rinsing.
10 SUPPLEMENTARY FUNCTIONS
Indicator lights showing: off; green; orange;
flashing.
To select a supplementary function,
when the program required is shown on the display (
P1, P2, P3 or
P4
) press the
button. Only
one supplementary function
can be selected for each program.
10.1
Selecting the crys“glassware” function (available in P1-P2)
Reduces the program’s rinsing temperature and duration
After selecting the "Crys” function, perform a cycle with the appliance empty to stabilise the boiler
temperature
Press
and hold it down to select the glassware
function then press
to confirm the program start.
10.2
Selecting the erin “extra rinse” function (available in P1-P2-P3-P4)
Extends the duration of the rinse
Summary of Contents for PROFESSIONAL GLASSWASHER
Page 1: ...PROFESSIONAL GLASSWASHER ...
