12
Detergent pump total operating minutes display.
This value can be reset during pump maintenance - see
below.
Energy consumption (kW) display
The
Pc
option indicates the total kW consumed since
installation of the glasswasher or since the latest reset.
Display of the number of cycles performed
When scrolling through the appliance parameters, the “tc
88888” item will also appear; this is the count of the total
cycles performed by the glasswasher since installation.
This parameter cannot be modified or reset
unless the
software is reprogrammed.
Customisation of duration of program
P4.
This submenu and the relative functions can only be
accessed with the aid of a password available on
SmegTech and only by technical staff.
6.2
Quit “SET-UP” menu
Wait more than 10 seconds without pressing any button and the appliance quits this menu
automatically,
or press the on/off
button to exit.
Indicator lights showing: off; green; orange;
flashing.
Caution:
the tank and boiler temperatures shown on the display may be differ from the actual
temperatures by a few degrees, especially in transient phases (just after the FILL is completed, just after
the end of the cycle, etc.) due to the inertia of the measurement probe.
Summary of Contents for PROFESSIONAL GLASSWASHER
Page 1: ...PROFESSIONAL GLASSWASHER ...
