24
TOTAL PUMP-OUT AT THE END OF THE DAY
The glasswasher is able to perform an automatic cleaning cycle at the end of the day.
Press the pump-out button
and the display shows
“UnLo”
and the duration.
Confirm by pressing
; light
L2
turns orange.
When pump-out is complete the appliance switches to
“
OFF
” status.
After a total pump-out the filters should be cleaned as described above.
Never switch the glasswasher off with water in the tank; always pump out first.
TOTAL PUMP-OUT AT THE END OF THE DAY + RESIN REGENERATION
(for models with water softener)
From time to time, on models with water softener, before the total pump-out at the end of the day the
user will automatically be reminded to carry out the resin regeneration cycle, required after a number of
washes which depends on the hardness of the water (about 30 for average setting H03). In this case the
sequence will be as follows:
Press the pump-out button
; “
rEgE
” and the duration
appear on the display.
Confirm by pressing
; light
L2
turns orange.
Summary of Contents for PROFESSIONAL GLASSWASHER
Page 1: ...PROFESSIONAL GLASSWASHER ...
