Doc. No. ZQ-OM01301-A
- 11 -
3. Mounting and Installation
3.1
Mounting
3.1.1 Standalone product (Direct mounting)
1) Directly mount the product on the wall surface, etc. by using the mounting holes (2 x
ø
3.2)
in the body.
2) Use the recommended tightening torque (0.54 to 0.66 Nm) to mount the product.
3.1.2 Standalone product (Mounting with a bracket)
1) Mount the optional bracket (ZQ1-BK1-A) to the mounting holes (2 x
ø
3.2) on the product
body side using the round head combination screws and hexagon nuts included in the
accessories, and mount the product on the floor, etc. using the mounting holes on the
bracket (4 x
ø
3.2).
2) Use the recommended tightening torque (0.54 to 0.66 Nm) to mount the bracket.
3.1.3 Manifold product
1) Directly mount the manifold product on the floor, etc. using the mounting holes of the end
plate with the washers included in the accessories, and screws with the following
recommended mounting screw size.
Recommended mounting screw size: M3 without the PD-port / M4 with the PD-port
2) Use the recommended tightening torque (0.54 to 0.66 Nm) to mount the product.
Mounting hole
(2 parts)
Round head
combination screws
Hexagon nuts
Bracket
Washer included in
the accessories
(4 pcs.)
Mounting hole
(4 parts)
Mounting hole
(4 parts)