SMCCO10-Z CO Alarm User Guide
Copyright
©
2013 SMC Networks
Page 16
All Rights Reserved
I/M SMCC010-Z rev. 1.0
1/23/2013
9/3/10
For these reasons, we recommend you provide
complete coverage by placing a CO alarm on
every level of the home.
CO alarms should not be used to detect the
presence of natural gas (methane), propane,
butane, or other combustible fuels.
Instruct children never to touch or otherwise
interfere with the alarm. Warn children of the
dangers of CO poisoning.
15
Warning Statements
Your SMCCO10-Z detects CO from ANY source
of combustion. It is NOT designed to detect
smoke, fire, or any other gas.
CO alarms are not smoke alarms. Your
SMCCO10-Z is not a substitute for installing and
maintaining an appropriate number of smoke
alarms in your home. This CO alarm will not
sense smoke, fire, or any poisonous gas other
than carbon monoxide even though carbon
monoxide can be generated by fire. For this
reason you must install smoke alarms to
provide early warning of fire and to protect
you and your family from fire and its related
hazards.
Your SMCCO10-Z will only indicate the
presence of CO at the sensor. CO may be
present in other areas.
This product is intended for use in ordinary
indoor locations of family living units. It is not
designed to measure compliance with
Occupational Safety and Health Administration
(OSHA), commercial, or industrial standards. It
is not suitable for installation in hazardous
locations as defined in the National Electric
Code. The installation of this device should not
be used as a substitute for proper installation,
use and maintenance of fuel burning
appliances, including appropriate ventilation
and exhaust systems. It does not prevent CO
from occurring, nor can it solve an existing CO
problem.
This device is designed to protect individuals
from acute effects of carbon monoxide
exposure. It may not fully safeguard individuals
with specific medical conditions. If in doubt,
consult a medical practitioner. Individuals with
medical problems may consider using warning
devices which provide audible and visual
signals for carbon monoxide concentrations
under 30 PPM.
This CO alarm requires a continuous supply of
electrical power. It will not work without
power.
This alarm has not been investigated for carbon
monoxide detection below 70 PPM.
Regulatory Information
WEEE Directive
2002/96/EC (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling,
return this product to your local
supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collection points. For more
information see: www.recyclethis.info.
