SMCCO10-Z CO Alarm User Guide
Copyright
©
2013 SMC Networks
Page 4
All Rights Reserved
I/M SMCC010-Z rev. 1.0
1/23/2013
9/3/10
H.
Touch each sensor icon to configure
the corresponding product. The Add
Sensor/Zone Modify screen appears.
I.
To change the product Icon (if
multiple options are available), tap
the currently selected value.
J.
Tap
Next
. The Add Sensor/Zone
Modify screen appears.
K.
To modify a text field on the
Touchscreen, tap the field, use the
onscreen keyboard to enter your
changes, and tap
Done
to save your
changes.
L.
When all sensors are configured
properly, tap
Next
in the Configure
Wireless Sensors screen.
M.
If all sensors have not been
configured, the Modify screen
appears for each sensor to let you
review its details. Change the
details as needed or tap
Next
to
cycle through all the sensors. The
sensors are marked as configured.
4
Mounting the Alarm
The SMCCO10-ZCO alarm can be mounted
on a wall or ceiling.
Before you mount the unit permanently,
verify RF performance (see “Running the
RF Communication Test” on page 7).
A.
Slide the alarm body off the
mounting plate. Place the mounting
plate in the desired location and
mark the location of the 2 mounting
holes. Orient the mounting plate
vertically or horizontally (see Figure
2 and Figure 3).
Note:
You can also mount the
SMCCO10-Z directly to a single gang box.
Figure 2. Mounting the Alarm Vertically
Figure 3. Mounting the Alarm Horizontally
