C
HAPTER
10
| Administration Settings
TR-069 Configuration
– 109 –
The following items are displayed on this pages:
ACS
Defines the Auto Configuration Server parameters.
◆
Enable
— Enables/disables TR-069 support. (Default: Enabled)
◆
URL
— Speceifies the URL required for the CPE to connect to the ACS.
◆
User Name
— Enter the user name that the ADSL Router should use
when connecting to the ACS.
◆
Password
— Enter the password that the ADSL Router should use
when connecting to the ACS.
◆
Periodic Inform Enable
— When this field is enabled, the DSL device
will send an Inform RPC to the ACS server at the system startup, and
will continue to send it periodically at an interval defined in Periodic
Inform Interval field; When this field is disabled, the DSL device will
only send Inform RPC to the ACS server once at the system startup.
(Default: Enabled)
◆
Periodic Inform Interval
— Time interval in seconds to send Inform
RPC.
C
ONNECTION
R
EQUEST
Defines the connection from the ADSL Router to the ACS.
◆
User Name
— The user name the remote ACS should use when
connecting to this device.
◆
Password
— The password the remote ACS should use when
connecting to this device.
◆
Path
— The path of the device ConnectionRequestURL. The device
ConnectionRequestURL should be configured based on the Device_IP,
Path and Port as follows: http://Device_IP:Port/Path
◆
Port
— The port of the device ConnectionRequestURL.
D
EBUG
Sets options for displaying debug messages for the ACS connection.
◆
ACS Certificates CPE
— Selects if digital certificates are used on the
CPE.
◆
Show Message
— Displays ACS SOAP messages on the serial console.
◆
CPE sends GetRPC
— The router contacts the ACS to obtain Remote
Procedure Call methods.
