C
HAPTER
9
| Diagnostics
Diagnostic Test
– 97 –
D
IAGNOSTIC
T
EST
The diagnostic test shows the test results for the connectivity of the
physical layer and protocol layer for both LAN and WAN sides.
Figure 55: Diagnostic Test
The following items are displayed on this page:
◆
Select the Interface
— Selects the WAN connection. (Default: vc0)
◆
Run Diagnostic Test
— Performs a diagnostic test on the LAN and
WAN side connections.
LAN C
ONNECTION
C
HECK
Displays the result of a test for connectivity on the LAN port.
◆
Test Ethernet LAN Connection
— Displays the connectivity of the
Ethernet LAN port.
ADSL C
ONNECTION
T
EST
Displays the results of a test for connectivity on the WAN port.
◆
Test ADSL Synchronization
— Displays the connectivity of the ADSL
synchronisation.
◆
Test ATM OAM F5 Segment Loopback
— Displays the connectivity of
an F5 segment loopback of the permanent virtual circuit (PVC)
connection with your service provider.
◆
Test ATM OAM F5 End-to-end Loopback
— Displays the connectivity
of an F5 end-to-end loopback integrity test of the permanent virtual
circuit (PVC) connected to your service provider.
◆
Test ATM OAM F4 Segment Loopback
— Displays the connectivity of
an F4 segment loopback of the permanent virtual circuit (PVC)
connection with your service provider.
◆
Test ATM OAM F4 End-to-end Loopback
— Displays the connectivity
of an F4 end-to-end loopback integrity test of the permanent virtual
circuit (PVC) connected to your service provider.
