C
HAPTER
7
| Services
MAC Filtering
– 76 –
MAC F
ILTERING
MAC based packet filtering enables the router to filter clients based on their
physical layer address.
Figure 39: MAC Filtering Settings
The following items are displayed on this page:
◆
Outgoing Default Policy
— A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries are
allowed.)
◆
Incoming Default Policy
— A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries.)
N
OTE
:
The default outgoing and incoming defaults allow traffic from all MAC
addresses.
◆
Direction
— Specifies the packet destination. (Default: Outgoing)
◆
Action
— Specifies if traffic should be permitted or denied. (Options:
Deny, Allow; Default: Deny)
◆
Source MAC Address
— Specifies a source MAC address.
◆
Destination MAC Address
— Specifies a destination MAC address.
